HD Contractors

Standard Specs
 - Heavy Duty Construction
 - 8' x 7' up to 18' x 7'
 - All 10 Gauge Construction
 - 42" Bulkhead
 - 14" Sides
 - 22" Tailgate
 - Stake Pockets Both Sides
 - 3 Panel Boxed Tailgate
 - Flame Cut Hardware
 - Fixed or Drop Sides, One or Two Sections
 - Dirt Shedding Mudboards
 - 1/2" Hinges on Dropside
 - 3" Structural Crossmember
 - 6" Structural Longmember

S125, Super Duty and DS125

Standard Specs

 - 2-3 and 3-4 Yard Capacity
 - 10 or 12 Gauge Construction
 - Double Bend Top Rail
 - 1 Panel Tailgate
 - Vertical Side Braces On S125 and Super Duty
 - Sloped Mudboards
 - 8" Rear Corner Posts
 - 3" Structural Channel Crossmember
 - 5" Structural Channel Longmember
 - Flame Cut Upper & Lower Hardware
 - 1" Tailgate Pin

CS125

Standard Specs

 - 2-3 and 3-4 Yard Capacity
 - 10 Gauge Construction
 - Dirt Shedding Box Top Rail
 - 12" Rear Corner Posts
 - 1.25" Tailgate Pins
 - 3 Panel Boxed Tailgate
 - 3/4" Heavy Duty Flame Cut Hardware
 - Heavy Duty Control Assembly
 - Front Corner Posts
 - 3" Structural Cross Member
 - 5" Structural Cross Member
 - 525DA, C10-C20 Hoists
 - S416DA, C20
 - S519DA, C30

S20U

Standard Specs

 - 10' x 7'
 - 5-7 Yard
 - 10 Gauge Construction
 - 2 Panel Boxed Tailgate
 - 1 Oval Light Hole on each Rear Post
 - 12" Rear Corner Posts Full Depth
 - 3/4" Heavy Duty Flame Cut Hardware
 - 3" Structural Crossmember
 - 5" Structural Longmember
 - Dirt Shedding Box Top Rail
 - 1 Formed Horizontal Side Brace
 - 13.5 Ton, 720 DA Hoist Twin Lift Arm
 - 1.25" Tailgate Pins

S25U

Standard Specs

 - 9' x 7' and 10' x 7'
 - Dirt Shedding Box Top Rail
 - 6 Panel Tailgate
 - 12" Rear Corner Posts Full Depth
 - 5" Structural Longmember
 - 3" Structural Crossmember
 - 10 Gauge Construction
 - 3 Vertical Side Braces
 - 1.25" Tailgate Pins
 - 3/4" Heavy Duty Flame Cut Hardware
 - 720C40 and 820C50 Twin Lift Arm Hoist
   824C60 and 8824C90
 - 4-5 Yard, 5-6 Yard, 5-7 Yard, 6-8 Yard

S25F - 8 Yards to 25 Yards

Standard Specs

 - 10' x 7' up to 18' x 7'
 - All 10 Gauge Construction
 - Dirt Shedding Box Top Rail
 - Six Panel Tailgate
 - 1" Heavy Duty Flame Cut Hardware
 - Dirt Shedding Rub Rail
 - Front Mount Telescopic Hoists SA
 - 4" Structural Channel Crossmember
 - 7" Structural Channel Longmember
 - 1.25" Tailgate Pin
 - Boxed Vertical Side Braces