"U" Series Under-Tailgate Spreaders

The "U" Series Under-Tailgate Spreader from Bonnell Industries is the most rugged under-tailgate spreader on the market today. With features such as a 7 gauge top cover and bottom clean out door, the "U" Series under-tailgate spreader was designed to meet the demands of the most rigorous conditions.

Material discharge efficiency is maximized with features including the radius bottom clean out door, with optional drop port locations.

Available in either carbon or 304 stainless steel, and with direct drive or gear box drive options, Bonnell Industries has an under-tailgate spreader that will fit your application.

Choose a light bar assembly and make your salt spreading operations efficient and safe.

Features

• IAS (Interchangeable Auger System)
   
• Heavy duty design for the most rigorous conditions
   
• 7 Gauge top cover and bottom clean out door
   
• Radius bottom clean out door
   
• Optional Drop Port Locations
   
• Available in Carbon or Stainless Steel
   

Replacement Tailgate Spreaders

The R161-DD Tailgate Spreader from Bonnell Industries is designed to fit most one ton trucks and replaces the existing tailgate on the dump body and provides the highest spinner ground clearance possible. The hinged bottom cleanout door cannot be fully opened without disconnecting the hydraulic hoses providing the ultimate safety for your operator.

Our auger is driven by direct drive hydraulic motor. Our full-width agitator is driven by a roller chain off of the auger shaft. You can rely on the agitator and 6" continuous-flited auger to ensure constant material flow. The R161-DD replacement tailgate spreader fastens to existing dump body hardware for fast mounting and removal without the use of special tools. Our standard polymer spinner disc eliminates the need to replace corroded steel fins. The adjustable spinner assembly remains parallel to the road at all dump box angles, and can be easily removed by pulling two pins and uncoupling two quick-disconnect hoses.

Features

• 7 Gauge bottom clean out door with Special Safety Feature
   

• Heavy duty design to meet the most rigorous conditions
   

• Highest Spinner Ground Clearance Possible
   

• Available in Carbon or Stainless Steel
   

• Direct Drive Auger
   

"BV" Series V-Box Spreaders

The Bonnell "BV" Series V-Box Spreader proudly continues a tradition of quality matched by no other in the industry. Standard features include 10 gauge hopper sides, which are solid welded on the inside for added strength and to prevent rust pockets, 8 tooth sprockets are provided for a more even distribution of material and longer drag chain life, Spring loaded conveyor chain keeps the conveyor chain tension correct at all times, and the list goes on and on.

Features

• 10 Gauge Hopper Sides
   
• 7 Gauge Longsills
   
• 8 Tooth sprockets are provided for a more even distribution
    of material and longer drag chain life
   
• Available in Carbon or Stainless Steel
   

"BJV" Series V-Box Spreaders

We know that getting the job done right is important to you - no matter how big or how small. And we know you just can't afford any down time! That's why, at Bonnell, the same exacting standards for quality we build into our larger products are included in our BJV hopper spreaders.

The BJV offers a wide range of possibilities for your smaller trucks. Units are available in 7' and 8' lengths in either carbon or stainless steel. You have your choice of either hydraulic drive or power supplied by an 10 h.p. I/C engine with an electric starter, electric clutch and electric throttle which are all controlled from the comfort of your cab. Top screens and an inverted "V" are standard features which help make your job a little easier. And there's lots more!

If you're looking for a unit that offers all of the features you want and gives you the quality you need at a price you can afford, you need look no further than Bonnell - your one-stop source for all your snow and ice control equipment needs.

Features

• One piece 12 Gauge Hopper Sides and Long Sills
   
• 6 Tooth sprockets are provided for a more even distribution
    of material and longer drag chain life
   
• Available in Carbon or Stainless Steel
   

"BMV" Series V-Box Spreaders

We know that getting the job done right is important to you - no matter how big or how small. And we know you just can't afford any down time! That's why, at Bonnell, the same exacting standards for quality we build into our larger products are included in our BMV hopper spreaders.

The BMV offers a wide range of possibilities for your medium trucks. Units are available in 8', 9’ and 10' lengths in either carbon or stainless steel. You have your choice of either hydraulic drive or power supplied by an 10 h.p. I/C engine with an electric starter, electric clutch and electric throttle which are all controlled from the comfort of your cab. Top screens and an inverted "V" are standard features which help make your job a little easier. And there's lots more!

If you're looking for a unit that offers all of the features you want and gives you the quality you need at a price you can afford, you need look no further than Bonnell - your one-stop source for all your snow and ice control equipment needs.

Features

• One piece 12 Gauge Hopper Sides and Long Sills
   
• 6 Tooth sprockets are provided for a more even distribution
    of material and longer drag chain life
   
• Available in Carbon or Stainless Steel