 |
Landscape Racks
The Parkhurst Landscape
Racks offer a versatile system. Available in 96"width
and lengths from 8 ft to 24 ft and in 42" and 52"
height. The standard rack set includes sides, front,
curbside door, double rear doors, weld on rear corner
posts, and knee brace gusset kit. Optional rear gate
includes 14" three-way contractor tailgate with double
rear above. Optional shields are available.
The full opening rear doors
allow brush, chips, and other debris to be dumped
without getting caught on a header bar and makes loading
of trees, shrubs, and plants easier also. Order with
the optional rear if you need to spread gravel, chat, or
sand. The side door allows easy access to the front of
the body.
|
|
|
|
 |
Contractor Body
|
Lengths: |
8',
10', 12', 14', 16', and 18' |
|
Width: |
96"
OD 90" ID |
|
Bulkhead: |
-
42" high 12
ga. formed steel panel
-
24" high x
full width screened window
-
14 ga.
formed steel stakes with liners
-
Knee brace
gusset kit
|
|
Sides |
-
14" high 12
ga. formed steel panel
-
14 ga.
formed steel stakes
-
Spring
loaded latches at each end
-
Forged butt
hinge & pin with 1/4" thick strap hinge
|
|
Tail Gate: |
-
14" high 12
ga. formed steel panel
-
12 ga.
formed steel vertical stiffeners
-
2 1/2" x 2
1/2" x 12 ga. tube horizontal
stiffener
-
Forged butt
hinge & pin with 1/4" thick strap hinge
-
3/16" rear
rail cap
-
Spreader
chains
|
|
Corner Posts: |
-
14" high 12
ga. formed steel
-
10 ga.
corner cap with spring loaded latch
pin/hinge
-
Inside
stakes 14 ga. formed steel with liners
-
Tapered
inside for easier material flow
|
|
Hardware |
All
attaching hardware included |
|
|
LIFT OUT STYLE |
|
Lengths: |
8',
9'6", 10', 12', 14', 16', 18' and 20' |
|
Widths: |
96"
OD 90" ID & 87 1/4" OD 81 1/4" ID |
|
|
|
|
 |
Grain Body
|
Heights: |
42",
52" |
|
Interior Length: |
6"
less than platform |
|
Interior Width: |
87
1/4" = 81 3/4"
96" = 90 1/2" |
|
Panel Skins: |
42",
16 gauge rollformed
52", 14 gauge rollformed |
|
Stakes: |
14
gauge with liners |
|
Rears: |
42"
- 2 wings, 39 5/8" x 32" high grain gate, 10"
filler panel, bull bar
52" - same but with 20" filler panel |
|
|
|
|
 |
Stake Body
|
Lengths: |
7',
8', 9'6", 10', 12', 14', 16', 18', 20', 22', 24' |
|
Standard Heights: |
7',
8', 9'6", 12'- 30"
9'6" , 10', 12', 14', 16', 18', 20', 22', 24 -
40"
Other Heights on request |
|
Interior Dimensions: |
6"
less than length and width |
|
Slats: |
6"
16 gauge rollformed steel or 1 x 6 pine |
|
Stakes: |
15
gauge rollformed with liners |
|
Front: |
12
gauge bulkhead w/full width window standard
Stake front optional |
|
Rears: |
Hinged, swing out |
|
Hardware: |
Western style heavy duty spring loaded gate
locks with plated
hinge rods on swing gate and rears. |
|
Hold down latch: |
Spring-loaded in stake: 1 per section |
|
Side Sections: |
7'-10' 2-piece sides
12'-20' 3-piece sides/1 swing gate per side
22'-24' 4-piece sides/1 swing gate per side |
|
Paint: |
Primed and painted with Industrial Enamel |
|
|
|
|
 |
Rancher
|
Sizes: |
8'3" x 84" - 92" -
96", 9' x 92" - 96" - 991/2", 10', 11', 12' x
96" or 99 1/2", 96" & 99 1/2" wide bodies are
tapered at front for sleek style and
appearance. Square front optional. |
|
Floor: |
Treadplate, 12 gauge |
|
Side Rail: |
7" vertical face |
|
Pockets: |
3/16" formed steel
to accommodate 2" x 4" lumber |
|
Tie Rail: |
3/8" x 2" steel
segmented for ease in fuel fill installation |
|
Crossmembers: |
3" - 4.1# structural
channel |
|
Longsills: |
5" - 6.7# structural
channel |
|
Headboard: |
14 gauge smooth
steel panel with 3" x 2" – 11 gauge rectangular
tubing frame with louvered window;
39" high; 35" high on 8'3" x 84" |
|
Rear Apron: |
3/16" smooth steel |
|
Gooseneck Hitch: |
Recessed gooseneck
hitch with safety chain loop standard, (ball not
included) Atwood B-25 retractable ball assembly
optional |
|
Receiver Hitch: |
3" x 4" x ¼"
rectangular tubing frame with tube for 2"
receiver hitch; safety chain loops; and tail
light brackets |
|
Lights: |
Required lighting &
marking per FMVSS108 installed |
|
Standard finish for
platforms is black. |
|
