Warren Dump Bodies

All Warren Dump Bodies are designed for heavy duty use in mind. From our U-551 to the WXL series, these bodies will give you years of use at an affordable price. There are many options to choose from as well and ALL our products are made in the U.S.A.

U-551
With option 1/2
cab shield installed

Extra Heavy Duty Package U-551

Warren 551 dump bodies are designed for heavy duty use having 3/16" ASTM A1011-A45 hi-tensile steel construction with 6" wide side braces, 10" wrap around front corner post, six panel tailgate and strong "stacked type" understructure for extended life. These units are engineered for contractors and governmental agencies that require a unit that will stand up under hard everyday material hauling and give long economical service.

Features & Benefits
- ASTM-A1011-A45 High Tensile steel
- Body, cylinder and NTEA rated hoist manufactured by Warren
- Continuous welding throughout body for additional strength
- Full depth rear corner post with full depth rear crossmember
- 4 x 4 x 1/8" boxed tubing top rails and 10" wrap around front corner post

Body Specifications

Construction ASTM A1011-A-45 Hi-tensile steel

Understructure 4" - 5.4#/ft. channel crossmembers for U10-551

(all on 12" centers) 6" - 12.5#/ft. "I" beam longitudinals for U10-551

Floor 3/16" High Tensile steel - 7' 3" inside width w/radius edges

Sides 3/16" High Tensile steel w/10" high front & rear gussets w/sideboard pockets

6" box side braces - boxed top rail - 4" sq. tubing

10" wrap around front corner post

10" full depth rear corner posts & skirt (on 10' body)

Dirt shedding rub rails

Tailgate 3/16" vertical type - 10" higher than sides

Boxed perimeter w/horizontal & vertical brackign - 6 panel

H.D. hardware w/1-1/4" dia. hinge and latch pins

Offset flame cut steel plate upper hinge

Double lower sockets w/overhooks

Air Operated Latch

Bodyhead 3/16" High Tensile steel

Horizontal formed-in bracing

10" higher than sides

Dimensions Width - Inside - 7' 3"

Length - 10'

Capacity Struck/sides & ends - U10-551 - 5.5/7.5 cu. yards

For Options & Pricing, give us a call! Let us build you a truck to your needs and specifications.

16' Unit w/Options

Aluminum Dump Body

Warren offers the strength of steel and the weight advantages of aluminum. An increased payload potential of up to 2,200 pounds or a 1/3 weight reduction is achieved when compared to similar steel bodies. Extra profit is generated with every load. Eliminates corrosion and painting costs incurred with comparable steel units. This not only saves you money, but you receive the added benefit of an outstanding appearance for years to come.

At trade in time, aluminum historically retains 70% of its original value. In the long run, Warren aluminum will save you money and look good doing it. The premium quality Warren aluminum is a great investment. Consider your next dump body purchase the value loaded Warren.

Features & Benefits of aluminum dump bodies
- Extruded top and bottom side rails, and side braces for extra strength
- Cylinder and NTEA rated hoist manufactured by Warren for single source
- Continuous welding throughout body

Standard Body Features

Floor Material	0.250" alloy, 5083-H32
Cross Members	4" I beam extruded 6061-T6 on 12" centers
Longitudinal	I beam 6" x 6.1 # 6061-T6 with integral track for mount rubber
Side Material	0.160" alloy, 5454-H34 STD 0.190" & 0.250" optional
Top Rail	4" boxed top, extruded 6061-T6 alloy
Bottom Rail	Extruded aluminum 6061-T6 w/integral inner clean-out
Vertical Uprights	8" extruded 6061-T6 alloy
Front	0.190" bulkhead continuous welded
Cab Shield	1/2 cab shield
Tailgate	0.190" plate, 5454-H34, extruded 6061-T6 braces,
	3-1/2" air cylinder operated latch, steel bolt-on hinges
Ladder	None, with many options available
Lights	LED FMVSS 108, 12 volt with harness

For Options & Pricing, give us a call! Let us build you a truck to your needs and specifications.

10' stainless steel WXL body with E/AC2420-A SS spreader

WXL Series

The Warren WXL series dump bodies are designed for mounting on single and heavy duty tandem axle chassis. These units are engineered for governmental agencies that require a strong unit that will hold up under extreme conditions.

Features & Benefits
- 304 stainless steel or AR-400 construction
- Body, cylinder, & NTEA rated hoist manufactured by Warren
- Continuous welding throughout body for additional strength
- Crossmemberless - no dirt buildup in crossmembers
- Full depth rear corner post and front 10" wrap around post
- 4 x 4 x 1/8" boxed tubing top rails
- Three panel, air-operated tailgate

Standard Body

Construction	Continuously welded unibody design
Understructure	8" H-beam @ 13.0#/ft. long rails on bodies using VTLW hoist
	10" H-beam @ 15.0#/ft. long rails on bodies using U60-823 hoist
	10" Steel tubing long rails when using U110-8824 hoist
	No Crossmembers
Floor	3/16" AR400 (one piece floor)
Sides	10 gauge ASTM A1010 A-45
	4" square 11 gauge structural tubing top rails
	45 degree knee brace floor/side & dirt shedder lower outer rail
	10" wrap around front corner post
	10" full depth rear corner post & rear skirt
Tailgate	3/16" AR400
	3 panel horizontal braced
Front Bulkhead	10 gauge ASTM A1011 A-45
Dimensions	96" outside width; 87" inside width
	Lengths - 10' to 18'

For Options & Pricing, give us a call! Let us build you a truck to your needs and specifications.

	Home

	Special Offers

	Check Out Our Work!

	Parts Department

	Contacts

	Directions

	Request Info/ Quote Form